Material
Made of 100% recycled solid rubber and has a weight capacity up to 15,000 kg
Usage
Compact rectangular design makes Dock Bumpers the ideal heavy duty solution when used as independent blocks for docking trucks and other vehicles.
Package
Usually packed in woven bag . Rubber products do not afraid of fall and down. It is good enough in transportation.
You also can ask carton packaging with customized logo on carton surface .
Features:
- Heavy duty rubber bumper stop with rear void
- Molded angle design to absorb and distribute impact
- Reduces damage to loading dock bays / trucks
- Two mounting holes
- Vertical installation (bolts not included)
- Works great for truck in protection
- 1 year manufacturer’s warranty
|
Model No |
Length |
Width |
Height |
Holes spacing |
Unit weight |
Material |
Capacity |
Color |
|
RBA06 |
300mm |
200mm |
90mm |
165mm |
5.8kg |
Rubber |
15,000kg |
Only Black |
|
RBA07 |
330mm |
300mm |
95mm |
12kg |
Rubber |
15,000kg |
Only Black |
|
|
RBA08 |
400mm |
200mm |
100mm |
290mm |
10kg |
Rubber |
15,000kg |
Only Black |
|
RBA09 |
400mm |
200mm |
100mm |
210mm |
12.5kg |
Rubber |
15,000kg |
Only Black |
|
RBA10 |
450mm |
250mm |
100mm |
250mm |
13.5kg |
Rubber |
15,000kg |
Only Black |
|
RBA11 |
450mm |
250mm |
150mm |
250mm |
19kg |
Rubber |
15,000kg |
Only Black |
|
RBA12 |
500mm |
250mm |
90mm |
250mm |
14.5kg |
Rubber |
15,000kg |
Only Black |
|
RBA13 |
500mm |
250mm |
100mm |
335mm |
18kg |
Rubber |
15,000kg |
Only Black |
|
RBA14 |
500mm |
250mm |
100mm |
320mm |
15kg |
Rubber |
15,000kg |
Only Black |
Our rubber bumper is made of long lifespan, impact absorbing rubber. The bumpers are available in different sizes and models.
These polyethene dock bumpers are very durable and environmentally friendly. After the lifetime the bumper can be crushed to granules again.
Our standard dock bumper heights are 6″, 10″, or 12″. The height can be increased by expanding the angle length and “stacking” dock bumper pads between them to create vertical units–20″, 24″ and 36″.
The primary application for the 6″ dock bumper is on lip docks where the dock slab projects beyond the foundation with an impact face of less than 10″ high.
The 10″ dock bumper is widely used for standard height docks that accommodate standard, or approximately equal-height trucks.
The heavier constructed 12″ dock bumper provides greater area and cube of rubber with a stronger steel frame (three connecting rods.)
The 20″, 24″, or 36″ vertical heights provide extended depth protection for varying truck heights. (Fig. 1) or the lower steel members of trailer bodies. Consider them for docks that accommodate panel and pebble trucks as well as over the road trailers.
Vertical units are particularly applicable with truck leveling devices that raise the entire truck to dock level. Combined with horizontal units, (Figs. 3 & 4), vertical units prevent a loaded trailer from prying off the shorter bumpers as the truck bed rises while being unloaded (Fig. 2)
